branch «Paper Mill «Krasnaya Zvezda» of the OJSC "Svetlogorsk PCM" 

Open Joint-Stock Company "Paper Mill "Krasnaya Zvezda" was reorganized and joined to OJSC "Svetlogorsk Pulp and Cardboard Mill".

There are realized any investment projects of technical upgrading. The upgrading of mechanical equipment, increasing the volume of output products and economic efficiency of the factory.

The factory began to produce paper for corrugating high grades, two-layer cardboard for flat layers of high grades, as well as kraft-bag paper.


​​​​​Capacity of branch

Two papermakin machines

36000 tons

Corrugating mashines

18 million. m3

Corrugated boxes line

3,6 million. m3
Paper bags line 7 млн. штук


Today the company's products bring off both on the market of the Republic of Belarus and in the countries of near and far abroad.




GOST 7377-85, ТУ BY 400004877.031-2016 Tariff code 4805199000

Pack paper

GOST 8273-75 Tariff code 4805910000

Kraft bags paper

ТУ BY 300007961.012-2006 Tariff code 4804219000
Corrugated board ТУ BY 300007961.015-2006 Tariff code 4808100000
Corrugated board boxes GOST 9142-2014, ТО РБ 00280100.007-2000 Tariff code 4819100000
Paper bags GOST 2226-2013 Tariff code 4819300001
Honey combs ТУ BY 400004877.013-2010 Tariff code 4823908597
Water-dispersion paint and primer ТУ BY 300007961.017-2006 Tariff code 3209100009

branch «Lesopileniye» of the OJSC «Svetlogorsk PCM»

The branch "Lesopileniye" was established by election BOS of JSC "Svetlogorsk Pulp and Cardboard Mill" on 7th May 2017.

The branch manufacturability produces up to 40 thousand m3 of hardwood sawn timbers.

Sawn timber are produced according to State Standard (STB 1713-2007) of coniferous wood species per year. These woods have no vessels, the core rays are very narrow and are not visible by necked eye, but due to the fact the late wood is darker than the early one, the annual rings are good visible in them, providing for a sweet grain of the saw cut. OJSC "Svetlogorsk Pulp and Cardboard Mill" produces 4 grades of edged boards and bars: 1st, 2nd, 3rd and 4th.

The woodworking line «Giga 02» of the company «A.COSTA» (Italy) is edged boards and bars with length up to 6 thousand millimeters, width up 90 to 150 mm, thickness up 18 to 50 mm.

The drying equipment of Secea (Italy) holds 1200 m3 of lumber and allows drying the finished lumber to 15% humidity per 5 days, and up to 7% per 7 days. Dried to 15% moisture, lumber is ready for use in building industry, lumber dried to 7% moisture is used in joinery shop.

For easy lumber transportation, OJSC "Svetlogorsk Pulp and Cardboard Mill" has a packaging line with the possibility of packing finished lumber into polyethylene film and dressing with plastic (polypropylene) tape.

Lumber is transported by road (truck - 40 m3).

Tariff code 4407109300